Genuinely plug-and-play
Factory connectors, no cutting, no external ballast. Most installations take under 20 minutes per side.
Language
MX · Mini 1:1 LED
Factory-fit footprint, 1:1 filament position, no external driver.
Factory-housing fitment with a 1:1 filament position and no external driver to hide.
Specifications are typical values measured at 25 °C and 13.2 V. Custom CCT and housing options available.
Overview
Factory-housing fitment with a 1:1 filament position and no external driver to hide.
Factory-fit footprint, 1:1 filament position, no external driver.
Request MX-6GALLERY / MX-6
01
02
Factory-fit footprint, 1:1 filament position, no external driver.
6,000 lm
60 W per pair
6000 K
9–32 V
H1H4H7H1190059006
30,000 h
IP67
3 years
Integrated driver
Low / high beam
2 × MX-6 (per pair)
03
Factory connectors, no cutting, no external ballast. Most installations take under 20 minutes per side.
A shortened heat path and integrated driver keep the body small enough for tight housings and projector shrouds.
Filtered constant-current drivers work on more than 98% of tested platforms, with a decoder harness included for sensitive vehicles.
04
Adapter harnesses are available for H8/H9/H11, 9004/HB1, 9007/HB5 and other uncommon sockets. Ask for the current compatibility sheet.
04 / Engineering
Inside the labA bulb is a system: optics, thermal path, driver and validation. Weakness in any one shows up on the road.
Optics
The emitting surface sits exactly where the halogen filament did, so the factory reflector can do the job it was designed for.
Thermal
Heat pipes move 30% more energy away from the chip, and a 12,000 rpm fan holds junction temperature at 105 °C.
Electronics
Filtered drivers, 9–32 V input and stable current keep ECUs, DRLs and radios free of flicker and error codes.
Validation
1,200-hour aging, IP68 immersion, thermal shock and 30 G vibration — completed before a batch is allowed to ship.
05 / Applications
Talk about your projectPlug-and-play upgrades that keep factory housings, DRL behaviour and error messages untouched.
Compact thermal design for tight fairings and stop-start city riding.
Spot and flood pods for trail, desert and night recovery, sealed against everything.
06 / Assurance
Every batch is traceable to its test record. If a unit fails in the field, we can tell you which line and which shift made it.
Compliance & certifications
08 / Questions
The short answers. The long ones live in the engineering notes.
It depends on your country and housing. Our road-legal ranges carry ECE R112 E-marks; competition and off-road products do not. Tell us your market and we will send the exact list of approved SKUs.
The VX, XD and MX drivers are CANbus-stable on more than 98% of tested platforms. For sensitive vehicles we include a decoder harness at no extra cost.
Not for MX, XD, SP or SG — the driver is integrated. VX and PL use a compact inline driver that fits inside most housings.
Three years against manufacturing defects, with batch-level traceability. Field failure rate is below 0.4%.