SP-4 — Spot & Auxiliary
Flagship SP

SP · Spot & Auxiliary

SP-4

A 4,800-lumen spot pod that survives the trail.

Focused pods for grille, bumper and roof mounts — sealed, bracket-ready and 9–32 V.

  • CANbus-stable
  • IP68 sealed
  • 3-year warranty
Output 4,800 lm
Power 40 W
Color temperature 6000 K
Ingress protection IP68

Specifications are typical values measured at 25 °C and 13.2 V. Custom CCT and housing options available.

SP-4 — Spot & Auxiliary

Overview

Spot & Auxiliary · SP-4

Focused pods for grille, bumper and roof mounts — sealed, bracket-ready and 9–32 V.

A 4,800-lumen spot pod that survives the trail.

Request SP-4

01

Technical specifications

Output
4,800 lm
Power
40 W per unit
Color temperature
6000 K
Voltage
9–32 V
Base options
Universal
Rated life
50,000 h
Ingress protection
IP68
Warranty
3 years
Driver
Integrated driver
Beam
Spot 10°
Lens
2.6 in
Pack
1 × SP-4 (per unit)

02

Product details

  1. 01Overview

    A 4,800-lumen spot pod that survives the trail.

  2. 02Output

    4,800 lm

  3. 03Power

    40 W per unit

  4. 04Color temperature

    6000 K

  5. 05Voltage

    9–32 V

  6. 06Base options

    Universal

  7. 07Rated life

    50,000 h

  8. 08Ingress protection

    IP68

  9. 09Warranty

    3 years

  10. 10Driver

    Integrated driver

  11. 11Beam

    Spot 10°

  12. 12Lens

    2.6 in

  13. 13Pack

    1 × SP-4 (per unit)

03

Why it works

Copper heat-pipe cooling

Sintered copper pipes and a 12,000 rpm fan hold the junction at 105 °C — 96% of initial lumens remain after 1,000 hours.

Sealed to IP65–IP68

Silicone gaskets, ultrasonic welds and a breathable membrane keep water and dust out through pressure washes and monsoon rain.

1:1 optical alignment

The emitting surface is positioned where the halogen filament was, within ±0.15 mm, so the factory reflector produces the beam it was designed for.

04

Fitment

Universal

Adapter harnesses are available for H8/H9/H11, 9004/HB1, 9007/HB5 and other uncommon sockets. Ask for the current compatibility sheet.

In the box

  • Matched lamps (1 × SP-4)
  • Driver and plug-and-play harness
  • Fitting guide and warranty card

04 / Engineering

Inside the lab

Four disciplines, one beam.

A bulb is a system: optics, thermal path, driver and validation. Weakness in any one shows up on the road.

01

Optics

1:1 filament placement

The emitting surface sits exactly where the halogen filament did, so the factory reflector can do the job it was designed for.

02

Thermal

Copper, not hope

Heat pipes move 30% more energy away from the chip, and a 12,000 rpm fan holds junction temperature at 105 °C.

03

Electronics

Quiet current for noisy cars

Filtered drivers, 9–32 V input and stable current keep ECUs, DRLs and radios free of flicker and error codes.

04

Validation

Tested to failure

1,200-hour aging, IP68 immersion, thermal shock and 30 G vibration — completed before a batch is allowed to ship.

05 / Applications

Talk about your project

Built for the way you actually drive.

Off-road

4×4 & adventure

Spot and flood pods for trail, desert and night recovery, sealed against everything.

Fleet

Heavy truck & bus

24 V-ready, vibration-tested lighting rated for a million kilometres of duty cycles.

Daily drivers

Passenger cars

Plug-and-play upgrades that keep factory housings, DRL behaviour and error messages untouched.

06 / Assurance

Certified before it's shipped.

Every batch is traceable to its test record. If a unit fails in the field, we can tell you which line and which shift made it.

38Export markets
1.2MUnits per year
18,000m² facility
Read the test protocol

Compliance & certifications

  • 01ISO 9001:2015
  • 02IATF 16949
  • 03ECE R112 E-mark
  • 04CE
  • 05RoHS
  • 06IEC 60529 IP68

08 / Questions

Asked before you buy.

The short answers. The long ones live in the engineering notes.

Ask us anything
01Are HWKAD bulbs legal on public roads?

It depends on your country and housing. Our road-legal ranges carry ECE R112 E-marks; competition and off-road products do not. Tell us your market and we will send the exact list of approved SKUs.

02Will I get a CANbus error or flicker?

The VX, XD and MX drivers are CANbus-stable on more than 98% of tested platforms. For sensitive vehicles we include a decoder harness at no extra cost.

03Do I need an external driver?

Not for MX, XD, SP or SG — the driver is integrated. VX and PL use a compact inline driver that fits inside most housings.

04What does the warranty cover?

Three years against manufacturing defects, with batch-level traceability. Field failure rate is below 0.4%.