PL-35 — Bi-LED Projector Lens
PL

PL · Bi-LED Projector Lens

PL-35

Compact projector performance for tight housings.

A true projector core: 5.0-inch lens, razor cut-off and a four-lane spread that stays out of oncoming eyes.

  • CANbus-stable
  • IP67 sealed
  • 3-year warranty
Output 12,000 lm
Power 110 W
Color temperature 6000 K
Ingress protection IP67

Specifications are typical values measured at 25 °C and 13.2 V. Custom CCT and housing options available.

PL-35 — Bi-LED Projector Lens

Overview

Bi-LED Projector Lens · PL-35

A true projector core: 5.0-inch lens, razor cut-off and a four-lane spread that stays out of oncoming eyes.

Compact projector performance for tight housings.

Request PL-35

01

Technical specifications

Output
12,000 lm
Power
110 W per pair
Color temperature
6000 K
Voltage
9–32 V
Base options
H4H7H11
Rated life
50,000 h
Ingress protection
IP67
Warranty
3 years
Driver
Inline driver
Beam
Low / high beam
Lens
3.0 in
Pack
2 × PL-35 (per pair)

02

Product details

  1. 01Overview

    Compact projector performance for tight housings.

  2. 02Output

    12,000 lm

  3. 03Power

    110 W per pair

  4. 04Color temperature

    6000 K

  5. 05Voltage

    9–32 V

  6. 06Base options

    H4H7H11

  7. 07Rated life

    50,000 h

  8. 08Ingress protection

    IP67

  9. 09Warranty

    3 years

  10. 10Driver

    Inline driver

  11. 11Beam

    Low / high beam

  12. 12Lens

    3.0 in

  13. 13Pack

    2 × PL-35 (per pair)

03

Why it works

1:1 optical alignment

The emitting surface is positioned where the halogen filament was, within ±0.15 mm, so the factory reflector produces the beam it was designed for.

Compact by design

A shortened heat path and integrated driver keep the body small enough for tight housings and projector shrouds.

Genuinely plug-and-play

Factory connectors, no cutting, no external ballast. Most installations take under 20 minutes per side.

04

Fitment

H4H7H11

Adapter harnesses are available for H8/H9/H11, 9004/HB1, 9007/HB5 and other uncommon sockets. Ask for the current compatibility sheet.

In the box

  • Matched lamps (2 × PL-35)
  • Driver and plug-and-play harness
  • Fitting guide and warranty card

04 / Engineering

Inside the lab

Four disciplines, one beam.

A bulb is a system: optics, thermal path, driver and validation. Weakness in any one shows up on the road.

01

Optics

1:1 filament placement

The emitting surface sits exactly where the halogen filament did, so the factory reflector can do the job it was designed for.

02

Thermal

Copper, not hope

Heat pipes move 30% more energy away from the chip, and a 12,000 rpm fan holds junction temperature at 105 °C.

03

Electronics

Quiet current for noisy cars

Filtered drivers, 9–32 V input and stable current keep ECUs, DRLs and radios free of flicker and error codes.

04

Validation

Tested to failure

1,200-hour aging, IP68 immersion, thermal shock and 30 G vibration — completed before a batch is allowed to ship.

05 / Applications

Talk about your project

Built for the way you actually drive.

Daily drivers

Passenger cars

Plug-and-play upgrades that keep factory housings, DRL behaviour and error messages untouched.

Off-road

4×4 & adventure

Spot and flood pods for trail, desert and night recovery, sealed against everything.

Two-wheel

Motorcycle & scooter

Compact thermal design for tight fairings and stop-start city riding.

06 / Assurance

Certified before it's shipped.

Every batch is traceable to its test record. If a unit fails in the field, we can tell you which line and which shift made it.

38Export markets
1.2MUnits per year
18,000m² facility
Read the test protocol

Compliance & certifications

  • 01ISO 9001:2015
  • 02IATF 16949
  • 03ECE R112 E-mark
  • 04CE
  • 05RoHS
  • 06IEC 60529 IP68

08 / Questions

Asked before you buy.

The short answers. The long ones live in the engineering notes.

Ask us anything
01Are HWKAD bulbs legal on public roads?

It depends on your country and housing. Our road-legal ranges carry ECE R112 E-marks; competition and off-road products do not. Tell us your market and we will send the exact list of approved SKUs.

02Will I get a CANbus error or flicker?

The VX, XD and MX drivers are CANbus-stable on more than 98% of tested platforms. For sensitive vehicles we include a decoder harness at no extra cost.

03Do I need an external driver?

Not for MX, XD, SP or SG — the driver is integrated. VX and PL use a compact inline driver that fits inside most housings.

04What does the warranty cover?

Three years against manufacturing defects, with batch-level traceability. Field failure rate is below 0.4%.