Compact by design
A shortened heat path and integrated driver keep the body small enough for tight housings and projector shrouds.
Language
SP · Spot & Auxiliary
Small flood pod for reverse, camp and close-range work.
Focused pods for grille, bumper and roof mounts — sealed, bracket-ready and 9–32 V.
Specifications are typical values measured at 25 °C and 13.2 V. Custom CCT and housing options available.
Overview
Focused pods for grille, bumper and roof mounts — sealed, bracket-ready and 9–32 V.
Small flood pod for reverse, camp and close-range work.
Request SP-2GALLERY / SP-2
01
02
Small flood pod for reverse, camp and close-range work.
2,400 lm
20 W per unit
6000 K
9–32 V
Universal
30,000 h
IP68
2 years
Integrated driver
Flood 30°
1.8 in
1 × SP-2 (per unit)
03
A shortened heat path and integrated driver keep the body small enough for tight housings and projector shrouds.
Silicone gaskets, ultrasonic welds and a breathable membrane keep water and dust out through pressure washes and monsoon rain.
Factory connectors, no cutting, no external ballast. Most installations take under 20 minutes per side.
04
Adapter harnesses are available for H8/H9/H11, 9004/HB1, 9007/HB5 and other uncommon sockets. Ask for the current compatibility sheet.
04 / Engineering
Inside the labA bulb is a system: optics, thermal path, driver and validation. Weakness in any one shows up on the road.
Optics
The emitting surface sits exactly where the halogen filament did, so the factory reflector can do the job it was designed for.
Thermal
Heat pipes move 30% more energy away from the chip, and a 12,000 rpm fan holds junction temperature at 105 °C.
Electronics
Filtered drivers, 9–32 V input and stable current keep ECUs, DRLs and radios free of flicker and error codes.
Validation
1,200-hour aging, IP68 immersion, thermal shock and 30 G vibration — completed before a batch is allowed to ship.
05 / Applications
Talk about your projectSpot and flood pods for trail, desert and night recovery, sealed against everything.
24 V-ready, vibration-tested lighting rated for a million kilometres of duty cycles.
Plug-and-play upgrades that keep factory housings, DRL behaviour and error messages untouched.
06 / Assurance
Every batch is traceable to its test record. If a unit fails in the field, we can tell you which line and which shift made it.
Compliance & certifications
08 / Questions
The short answers. The long ones live in the engineering notes.
It depends on your country and housing. Our road-legal ranges carry ECE R112 E-marks; competition and off-road products do not. Tell us your market and we will send the exact list of approved SKUs.
The VX, XD and MX drivers are CANbus-stable on more than 98% of tested platforms. For sensitive vehicles we include a decoder harness at no extra cost.
Not for MX, XD, SP or SG — the driver is integrated. VX and PL use a compact inline driver that fits inside most housings.
Three years against manufacturing defects, with batch-level traceability. Field failure rate is below 0.4%.